Building blocks best price, buy manufacturing kinds of sizes manufacturing DIY features

Building blocks environmentally friendly.

 

 

Environmentally friendly building blocks are lightweight aggregate blocks and Piccolomini (of dropouts). The combination of expanded clay lightweight concrete blocks and pushblock can significantly (2 times) to save on materials (the solution), the trim inside and out and work leaving the quality of the masonry at the proper level. For the construction of structures from building blocks is required in 2 times less of the binder solution.

 

Description

Organic building blocks have the advantages of

Comparative characteristics with other materials

Description expanded-clay concrete blocks

Advantages of expanded clay concrete blocks

The advantages of clay in comparison with alternative materials

Technical characteristics of lightweight aggregate concrete blocks

Description of pascolaro (from the dropouts)

The advantages of peccable

The advantages of peccable in comparison with alternative materials

Technical characteristics of pascolaro

 

Description:

Building blocks eco-friendly:

– lightweight aggregate blocks,

peskolovki (of dropouts).

 

Organic building blocks have the following advantages:

– environmentally friendly (sand, gravel, clay, cement),

brand strength from the M50, M75, M100 and more

– technology of production – vibropressovoe, automated line,

perfectly sharp geometry of the blocks,

– when you add a dye outer wall has a noble appearance,

– the total absence of plasticizers, chemical additives, chemical reagents.

 

Comparative characteristics with other materials:

Concrete Pushblock Gazosilikat Cinder block Foam Opilkobeton
Strength, kg/cm2 5-500 25-150 5-20 25-150 10-50 20-50
The volumetric weight (the average density), kg/m3 350-1800 500-1000 200-600 500-1000 450-900 500-900
Thermal conductivity, W/m*K 0,14-0,66 0,3-0,5 0,15-0,3 0,3-0,5 0,2-0,4 0,2-0,3
Frost resistance, cycles, winter-summer 50 15-25 10 35 – 50 25 25
Shrinkage, mm/m 0,3-0,5 0,3-0,5 1,5 0,3-0,5 0,6-1,2 0,5-1
Water absorption, % 5-10 25 100 25 95 80
The maximum number of stories (bearing walls) 3 3 1 1 1 1
Environmental friendliness harmless harmless harmful harmful harmful harmful

 

Description expanded-clay concrete blocks:

Standard size– 390*190*188 mm. Brand strength – M50, M75, M100 (on agreement with the customer). Quantity in 1 cubic meter – 72 PCs Quantity in 1 cubic meter of masonry walls – 64 PCs Quantity per pallet – 60-90sht (according to customer’s requirement). Weight of 1 pallet – 730 – 1100 kg (Tara).

Advantages of expanded clay concrete blocks:

– claydite-concrete building blocks adapted to difficult climatic conditions and are successfully used in both warm and cold climates,

hollow lightweight aggregate building blocks have low thermal conductivity values, which makes their use preferred in cold climatic conditions. The voids reduce the weight of the unit ensure good sound insulation

– the variety and combination of shapes and textures of blocks gives the Builder unlimited scope for creativity. The facades of the buildings constructed from this material do not require additional external decoration,

walls in block 1 has the same conductivity as the masonry brick in 2.5, and the volume of the block is equal to the volume of 3.5 pieces of bricks

the walls of aggregate concrete blocks goes well with all types of covering materials: tiles, decorative plaster. Due to the smooth surface reduces the consumption of finishing plaster

the primary use of hollow blocks is the construction of exterior walls and interior partitions, as well as filling the frame,

– a combination of expanded clay lightweight concrete blocks and pushblock can significantly (2 times) to save on materials (the solution), the trim inside and out and work leaving the quality of the masonry at the proper level. For the construction of structures from building blocks is required in 2 times less of the binder solution,

construction time reduced 6 times, and construction costs reduced by up to 40%,

– can be used in the construction of foundations with the number of floors not more than 3.

 

The advantages of clay in comparison with alternative materials:

en security. Concrete is made from natural materials (cement, sand, clay), which ensures its high environmental impact. A material is assigned a first class of radiation safety. It is fully consistent with modern sanitary-hygienic requirements in terms of insulation and vapor permeability,

the low thermal conductivity of concrete and use in the construction of hollow blocks making houses from this material are warm,

– low specific weight of clay allows to save on the Foundation and carry,

the size and weight of the units reduces the cost of labor and cement in wall construction, accelerate the construction

– low water absorption and, consequently, high frost resistance, increase the service life of structures made of clay, allow saving on the defence of the walls,

use blocks with continuous voids allows to build inside the walls of the primary structure (the supporting structures) that increase the carrying capacity of structures,

– ease of use. You can do without professional stonemason

low values of shrinkage provide savings on cosmetic repairs.

 

Technical characteristics of lightweight aggregate concrete blocks:

Strength, kg/cm2 5-500 The minimum values of strength of the lightweight heat-insulating blocks, the maximum – in the most severe constructive.
The volumetric weight (the average density), kg/m3 350-1800 With increasing % of cement content in lightweight aggregate concrete mixture will increase the volumetric weight and strength.
Thermal conductivity, W/m*K 0,14-0,66 The result was better than that of brick and concrete; deteriorates with increasing % of cement content.
Frost resistance, cycles, winter-summer 50 The minimal value of the lightweight insulating blocks, the maximum – in the most severe constructive.
Shrinkage, mm/m 0,3-0,5 A good indicator on the level of heavy concrete.
Water absorption, % 5-10 A good indicator that can be improved by the use of complex additives and plasticizers.
Vapor permeability, mg/(m*h*PA) 0,3-0,9 A high value in comparison with other building materials; increases with porosity and degree of hollowness of the blocks.
Fire resistance, min. at a temperature of 1050 With 180 A value higher than that of other lightweight concretes.
The maximum number of storeys 3 The maximum number of storeys of buildings: 3 floors (load bearing wall).
Cost, rubles/m3 2500-3900 Depends on the cement content in the mixture and the degree of hollowness.

 

Description of pascolaro (of dropouts):

Standard size– 390*190*188 mm. Brand strength – M50, M75, M100 (on agreement with the customer). Quantity in 1 cubic meter – 72 PCs.

Quantity in 1 cubic meter of masonry walls – 64 PCs Quantity per pallet – 60-90sht (according to customer’s requirement). Weight of 1 pallet – 730 – 1100 kg (Tara).

 

The advantages of peccable:

part of peccable consists of sand, gravel and cement,

the volume of peccable equal volume of 3.5 pieces of bricks

– construction time reduced 6 times, and construction costs reduced up to 70%

a combination of expanded clay lightweight concrete blocks and pushblock can significantly (2 times) to save on materials (the solution), the trim inside and out and work leaving the quality of the masonry at the proper level. For the construction of structures from building blocks is required in 2 times less of the binder solution;

– have all the characteristics imposed on the material for construction: moisture – and frost resistance, low thermal conductivity and good thermal insulation, durability and strength,

have all the other benefits that lightweight aggregate building blocks.

 

The advantages of peccable in comparison with alternative materials:

– environmental safety. Pushblock made from natural materials (cement, sand, gravel), which ensures its high environmental impact. A material is assigned a first class of radiation safety. It is fully consistent with modern sanitary-hygienic requirements on indicators of insulation and vapor permeability,

ease of use. You can do without professional stonemason

– low cost of peccable due to low cost components and low cost of masonry, which can significantly (2 times) to save on materials (the solution), the trim inside and out and work leaving the quality of the masonry at the appropriate level,

high strength and durability of the material, which allows the construction inside the walls of the primary structure (the supporting structures),

– frost resistance and fire resistance.

 

Technical characteristics of pascolaro:

Strength, kg/cm2 25-150 Corresponds to grades M25, M50, M75, M100, M125 M150 and. Pushblock is considered durable enough for the construction of small houses and industrial buildings.
The volumetric weight (the average density), kg/m3 500-1000 With increasing % of cement content in sand concrete mixture will increase the volumetric weight and strength.
Thermal conductivity, W/m*K 0,3-0,5 Corresponds to the average value.
Frost cycles, winter-summer 15-25 Corresponds to grades F15, F20, F25. Determines the service life of the material. Indicates the number of consecutive cycles of freezing and thawing. Pushblock considered to be quite resistant to low temperatures. Ideal for use in temperate climatic zone.
Shrinkage, mm/m 0,3-0,5 A good indicator on the level of heavy concrete.
Water absorption, % 25 The amount of moisture that is absorbed by the material during operation. Peskolovki have medium levels of absorption.
Fire-resistance, degrees C to 800 Withstands temperatures up to 800 degrees Celsius. Pushblock is non-combustible refractory material.
The maximum number of storeys 3 The maximum number of storeys of buildings: 3 floors (load bearing wall).
Cost, rubles/m3 2200-2800 Depends on the cement content in the mixture and the degree of hollowness