Automated welding machine used to weld curved and straight seams in all positions.
Automated welding machine Sunrise allows for fully automated welding in a given program. It has 12 welding modes, and allows you to perform all types of welded joints from welding metal, to weld joints with thickness up to 60 mm. When using flux-cored wire ensures maximum efficiency and welding speed.
Automated welding machine Sunrise is a completely new robotized welding complex of domestic production. The complex has a modular design that allows easy cleaning, replacement and repair of elements of the welding machine, without stopping the production process.
Automated welding machine Sunrise allows for fully automated welding for a given program.
The welding machine has a control Board with a maximum number of programmable parameters to produce the required weld.
The welding parameters are set using the remote control and loaded into a program memory of the welding apparatus, after which the instructions of “start” is performed. The control panel in turn has a simple and intuitive interface and posted the button that allows the welder even in overalls.
Automated welding machine Sunrise has 12 welding modes, and allows you to perform all types of welded joints from welding metal to the welding of joints with thickness up to 60 mm. When using flux-cored wire ensures maximum efficiency and welding speed.
For welding and welding under the complex angles and in different spatial positions is best suited welding wire Power Bridge and Power Pipe.
– increase the speed of production of welding works
– maintaining constant weld quality,
– the degree of provarci the weld does not change when you change the speed of movement of welding head (for example in inclined or horizontal sections) through the use of programmable units of the oscillation of the burner,
– two welding heads provide the necessary characteristics of the weld, both on the rotating and fixed parts of welded structures,
welding head can work in deviation to 15 degrees in both directions,
programmer 12 of the welding modes. Configured parameters: welding speed, wire feed, oscillation frequency of the welding head, the welding direction,etc.
– protection of the process and technology of welding from the manifestations of the “human factor” due to the blocking of performed welding program changes
– welding is controlled by remote control,
– 2 welding head for welding “circular joint left/right” to perform the welding of the pipeline
– can be used with various types of guide belts,
– additional thermal and mechanical protection of components and connections.
– in bridge construction,
– the oil and gas industry
and other areas where it is necessary to perform a large amount of work in a short time.
|The diameter of the welded product, mm
|Nominal welding current, a
|400 A (M21 100%)
|Capacity welding magazine, kg
|Wire diameter, mm
|Of 0.8-1.6 million
|The feed rate of the welding wire, m/min.
|2 – 12
|Welding speed, m/min
|0,1 – 1,15
|The oscillation amplitude of the welding torch, hail
|The oscillation frequency of the burner (installed in units of oscillations in 1 cm of path)
|0 – 10
|The latency on the edges, with
|The distance from the edge guide belt to the axis of the joint, mm
|Overall dimensions, LxWxH, mm
|480 x 360 x 350
Note: the description of technology for example automated welding machine Sunrise.