Complex water purification hydrowave method.
Complex water purification hydrowave method allows to solve the problem by cleaning the water of any degree of contamination, including surface-active substances, petroleum products, heavy metals, any liquid industrial waste and saline water environments (including sea water), different contamination without the use of consumables in the process of operation.
The offered complex of water purification using the hydrowave method allows to solve the problem by cleaning the water of any degree of contamination, including surface-active substances, petroleum products, heavy metals, any liquid industrial waste and saline water environments (including sea water), different contamination without the use of consumables in the process of operation.
Due to the hydrodynamic effects on clean (sea) water contact and heat transfer processes, there is an intensive evaporation with subsequent condensation, and the remainder water (brine) under the influence of a combination of high-frequency electromagnetic and hydrodynamic waves actively allocates the crystalline salt from solution.
Purification and desalination of water from suspended particles and soluble substances is carried out only due to hydrodynamic effects when exposed to water, the sources of mechanical vibrations.
Functional use the hydrowave method of water purification is not limited to treatment of water and wastewater of any degree of contamination. It has wide application and is used to produce new type of fuel of water and fuel oil.
The complex water treatment includes the following elements: climate unit-box, pump, reservoir pump-generator, capacity – condenser, crystallizer chamber for the saline sludge, control panel, piping system, valves, insulation.
– purification and desalination of sea water is conducted only by physical processes directly in the purified water,
– environmental safety,
– economical due to the absence of consumables in the process of operation,
– hydrowave method of water purification eliminates the use of chemicals,
– there are no filters, sorbents, ion exchange resins,
– may release salts in the form of a solid precipitate their separation by types
– undemanding to training of employees for maintenance, routine inspection and removal of indications of devices
– the specific energy costs less than known systems of similar purpose,
– no need to struggle with deposits of foreign substances, scale formation,etc.
– does not require a large time and capital costs for the construction of the complex
– has small dimensions and is placed in a standard container even if the capacity (50m3/h).
The complex of water purification is used for:
– cleaning of tanks from sludge,
– neutralization of cyanides in metallurgical industries hydrowave method
– cleaning of oil and petroleum products from sulfur and other harmful impurities,
– defrost frozen car with load,
– heating of bulk cargo in wagons hydrowave method
– produce new type of fuel of water and fuel oil.
|Mineralization of the initial water, g/l*||65|
|The total amount of dissolved substances of water consumed, g/l||to 0.5|
|Maximum air temperature, °C||70|
|The maximum temperature of the source water, °C||30|
|Maximum humidity, %||100|
|Voltage, single-phase network||220V, 50Hz|
|Voltage, three-phase network||380V, 50Hz|
|Capacity, m3 / day (or according to customer’s requirement)||1200|
|The specific power consumption, kWh/m3||to 3|
|The quality of treated water||according to customer’s requirement|
|Mode||continuous and automatic|
|Overall dimensions of module: length, width, height, m||10, 3, 3|
|Set the life time of the complex in years, not less||30|
|Warranty in years||1|
* unit is able to clean and obessolivanija water from any natural mineralization.
Note: the description of technology in example of the complex water purification hydrowave method.