Domestic automatic powder coating line.
Domestic automatic powder coating line is suitable for large batch and mass production, small-batch and piece production. Powder coatings have high corrosion and impact resistant properties compared to ordinary paints. They provide high-impact corrosion-resistant coating, which works in a temperature range from – 60 to + 150C. Approximately 95% of paint collected during cleaning of equipment, can be reused.
Automatic powder coating line is represented as:
– automatic conveyor lines powder coating,
– automatic lines of powder painting.
Designed for large-series and mass production, small batch and piece production.
– eco-friendliness, durability, durability, durability,
– savings due to the absence of the cost of solvents, the lack of expensive technological procedures,
– 100 % safety and ecological purity (absence of flammable and toxic liquid solvents, when using powder coatings is the separation of the chemical odor is virtually nonexistent, working conditions have the highest sanitary-and-hygienic indicators, there are no harmful organic compounds, volatile substances that are released when the polymerization can never reach the highest possible standards, there is no danger of ignition of the material),
– this method of painting has a broad palette of colors and allows you to choose any colors, textures, and textures, such as Golden or silver metallic, the surfaces of bronze, silver or granite,
– it is possible to obtain surfaces with different degrees of gloss, as well as embossed texture,
– powder coatings are available in finished form,
– when coating excludes such expensive processing procedure, such as viscosity control, tinting, priming cover,
– powder coatings have high corrosion and impact resistant properties compared to ordinary paints. They provide high-impact corrosion-resistant coating, which works in a temperature range from – 60 to + 150C,
to ensure reliable electrical insulation products,
– excluded the influence of the abrupt change of temperature on the quality of the paint,
– almost all the paint is transferred to the surface that is painted,
approximately 95% of paint collected during cleaning of the equipment can be reused,
– when painting material loss is minimal (with powder coating loss of approximately 1-4%, and when painting conventional paints losses amount to about 40%),
– you can reuse the paint deposited on the surface when spraying,
– powder paint has virtually no waste
– technology paint application is very simple, so it can be very fast to master
– coatings are of top quality and high performance,
– coatings have excellent exterior and physico-chemical characteristics, which are impossible to obtain using conventional paints,
for applying the powder coating does not need special knowledge or checking viscosity, the consumer receives the material directly in ready to use form,
– paint can be stored anywhere, there is no need to save them in large warehouses,
powder paint is applied in one layer due wholly dry matter content,
– powder coating dries in just half an hour
– this coating is very durable, making the transportation of colored products does not harm them, you must not spend money on packaging.
Conveyor of automatic powder coating line is suitable for large batch and mass production.
Conveyor complexes can be like a continuous motion chain and free–drive. This type of conveyor is the most effective paint products long more than 6 meters.
The line includes: area of sample unit of surface preparation, drying chamber, chamber of powder coating, the chamber of polymerization, a cooling zone, zone of discharge of the finished products.
– optimally suited for high-volume production with a moderate flow of parts
– the possibility of staining products weighing from a few grams to hundreds of kilograms,
– low cost
– high reliability,
– assembled from standard components,
– reduced operating costs through service chains and drive
– freely–driven conveyor provides the ability to switch the processing route of products and movement of products at different speeds.
Powder coating line designed for serial and small batch production.
The equipment includes: the chamber of polymerization, a spray booth dwuhpuchkova communicating with the two units of recovery, the transport system two way pendant.
– quality painting products
– land consists of several pieces of equipment, each of which performs its job, has a distinctive setting and features
– works over a long period of time
– thanks to high-quality tuning all the elements to work together, the line will be able to perform all its tasks with high efficiency.