Water-repellent fabric coating from the nanoparticles.
After treatment the material is water-repellent coating of nanoparticles (nano water-repellent) fabric obtains a stable hydrophobic properties. The treated fabric is not wetted by water and aqueous-alcoholic liquids, become resistant to various kinds of contamination, increases the life of the fabric.
To reduce moisture and contamination of the tissues it is advisable to use a special tool – a water-repellent coating of nanoparticles (water-repellent nano-coating), repulsive moisture from the surface tissue, and at the same time, not preventing the penetration of air. Also, this water-repellent coating prevents pollution caused by various colored liquids, which are used everywhere. When you use all kinds of drinks, for example, juices, wines, no need to worry about the cleanliness of the clothes, because the coating prevents stains from them in case of accidental spillage.
After treatment data material – water-repellent coating of nanoparticles (nano water-repellent) fabric obtains a stable hydrophobic properties. The treated fabric is not wetted by water and aqueous-alcoholic liquids, become resistant to various kinds of contamination, increases the life of the fabric. Implemented the so-called “Lotus effect” – a phenomenon describing the self-cleaning effect of superhydrophobic coatings. Water falling on the treated surface, droplets almost perfect spherical shape, which easily roll off the surface, carrying with it the particles of dirt and dust.
In the processing of tissue on the surface of the fiber forms a special protective layer with a thickness of a few nanometers. In the composition of the molecules that builds up on the surface of the fabric, there are special anchor groups that are like the anchor that firmly cling to the fibers, providing strength and resistance of the coating. These molecules have a hydrophobic part consisting of a linear hydrocarbon and perfluorinated radicals. In the molecule of a modifier such radicals like tails directed from the surface and imparts water-repellent properties. The product also includes a hydrophobic polymeric nanoparticles, creating additional nanorelief on the surface of fibers and increases the water repellency and the effectiveness of the protective coating.
– resistant water-repellent treatment of fabric,
– long service life (up to 3 washings),
– does not prevent the penetration of air,
– does not change the appearance of the product,
– prevents various kinds of dirt (stains from juice, wine, coffee and other colored liquids),
– facilitates the removal of grease,
– increases the life of the textile.
– processing of textile products.
In order to avoid the presence of contaminants before applying the means a textile should be washed in a sparing mode, the wash and dry. The agent should be applied by aerosol spray a rich spray. After application allow to dry for 6 hours.
Consumption means hydrophobe effect of ion – water repellent coating: 100 ml/1 m2. Temperature of application: +5°C – +25°C.
It is not recommended to apply the coating at the temperature of the air, surface or product is below +5°C and above +25°C; when the temperature of the coated area is less than 3°C from dew-point; in conditions of high condensation (close to water vapor).
Storage conditions: protect product from freezing.