Thin-layer modules of the SPT (separator counter-current type).

Thin-layer modules of the SPT (separator counter-current type).

 

 

Thin-layer modules of the SPT (separator counter-current type) are designed for separating solids and liquids, as well as other suspensions. They make it possible in 11 times to reduce the area of the clarifiers by increasing the surface area of the besiegers.

 

Description

Advantages

 

Description:

Thin-layer modules of the SPT (separator counter-current type) is suitable for separation of solid substances and liquidsas well as other suspensions.

A system of thin-layer modules SPT operates in a countercurrent mode. This means that the direction of flow in the module is from bottom to top, while the solids, in contact with the surface of deposition, deposited in the opposite direction.

The assembled modules form a besieging pipe V-shaped or Chevron shape. Modules of this form are very durable. This form is ideal for the deposition.

Assembled modules are placed in the tank at an angle 55-600.

Thin-layer modules of SPT used at the equipment for the treatment of drinking water, industrial plants for wastewater treatment, municipal services at installations for treatment of waste water for the primary and secondary settling, and for sludge drainage.

 

Advantages:

– ability to adapt to any shapes and sizes of tanks

modules are a durable composite design, quickly going to the ready design on the subject

– the area of the projection of the precipitating surfaces several times larger than the area of the base,

significantly – in 11 times to reduce the area of the clarifiers by increasing the surface area of the besiegers,

– provide laminar flow.