Thermopanels facade with insulation price buy for exterior home with ceramic tiles in the Russian finish

Thermal panels with heat insulation – cheap and environmentally friendly building materials.

 

 

Thermal panels with heat insulation (facade thermopanels) is a quick way cheaply, attractively, and effectively to insulate the Foundation, basement and facade of the house completely. Protects against environmental influences and mechanical damage, high tensile strength and durability. So, thermal panels with insulation thickness of 40 mm. replaces 880 (eight hundred eighty) mm brickwork. Provide savings for the construction of up to 50%.

 

Description

Advantages

Comparative table of materials

Installation

 

Description:

Thermal panels with heat insulation (facade thermopanels) is a quick way cheaply, attractively, and effectively to insulate the Foundation, basement and facade of the house completely.

The front part is made of clinker tiles under a brick, stoneware, or decorative wild stone with sand jointing.

Insulating layer is made of polyurethane foam. The thickness of the insulation 40, 60, 80 mm.

Panels are made with paint for the exception of “cold bridges”

The panels are provided with embeds for attachment directly to concrete or another surface.

Dimensions of panels 1000х600, 1200 mm x 600 mm.

Thermal panels with insulation thickness of 40 mm. replace 880 (eight hundred eighty) mm brickwork.

Thermal panels with heat insulation – a modern and economical way of finishing, restoration, effective insulation of walls of the building. Protects against environmental influences and mechanical damage, high tensile strength and durability.

 

   

 

Advantages:

– savings on the construction of up to 50%,

use natural and organic materials

– thermal panels with heat insulation do not change their properties over several decades

the installation is overlapping, which eliminates the appearance of “bridges” cold, mold or condensation

– thermal panels with heat insulation exclude the appearance of mechanical stresses and possible deformation under its own weight,

thermal panels with heat insulation material not subject to rot, decay, damage by rodents,

– has the lowest coefficient of thermal conductivity,

durability design,

10 mm of insulation replaces 220 mm. brick,

beautiful and smooth masonry made of clinker and porcelain tiles,

– thermal panels with heat insulation material has low water absorption,

when mounting the surface does not require amplification of the Foundation,

– thermal panels with heat insulation material can be mounted on any base – concrete, brick, blocks, keramzitobeton,etc.

mounting on the surface of the wall is made by screws for concrete, dowel pair and foam,

– installation of panels is possible at any time of the year

large selection of colors and textures,

– installation requires no special skills – can handle anyone

facade thermal panels with heat insulation material to protect against environmental influences and mechanical damage.

 

Comparative table of materials:

 

 

Installation:

Installation of panels is possible at any time of the year. If the mounting surface does not require amplification of the Foundation, thermal panels can be mounted on any base – concrete, bricks, blocks, keramzitobeton, etc. the Panels are fixed to the surface of the wall screws for concrete, dowel pair and foam. The panels in the mounting locations provided reinforced embedded. The installation is overlapping, which eliminates the appearance of “bridges” cold, mold or condensation. Installation does not require professional experts, despite the fact that there are complex architectural solutions in the design of the facade. In this case, if possible, it is better to consult a professional installation crew.