Sciencealpha

The technology of building energy-efficient homes without heat new Scandinavian modern company monolithic canadian Finnish residential wood frame country of private multi-storey brick houses under the key price to buy from a bar in stages videos of the panels on the piles of the blocks in the projects of SIPS panels

The technology of building energy-efficient homes without heat.

 

 

Construction technology energy efficient home allows you to build a comfortable capital at home warm for winter without heating in any climate zone and cool in summer without air conditioning.

 

Description

Used energy-efficient materials

Advantages

 

Description:

Construction technology energy efficient home allows you to build a comfortable capital at home warm for winter without heating in any climate zone and cool in summer without air conditioning.

This technology includes:

technology construction energy efficient house

manufacturing technology energy-efficient materials, including a line on manufacture of blocks,

energy-efficient materials for construction.

The technology completely eliminates the presence of energy in homes, and utilities in 20-25 times lower than in similar areas traditional houses.

 


Used energy-efficient materials:

As an energy efficient material designed and used brand new wall chetyrehspalnyh building element building block “EQUATOR”. The degree of teploenergoeffektivnye material when the thickness of the walls of the building at 40 cm of material “EQUATOR” 20-25 times higher than the usual traditional houses. Wall material “EQUATOR” on the effect of heat transfer resistance of enclosing structures (“FLOW”) is equal to R0 = 10,58 m2 K/W, or masonry (i.e., wall thickness 42.5 brick), or 1.52 meters dry solid timber. The service life of the unit for more than 850 years, the index of its cold hardiness F-1000 – in-sea-water, F-3000 – in fresh water.

The unit has a standard size (400 x 400 x 200 mm), wall thickness – 400 mm, weight 22,5 kg volume m3 0,032, the thickness of the insulating material inside the unit is 215 mm at a density of 13 kg/m3.

Building block “EQUATOR” consists of four layers of different thicknesses, each of which has its own properties:

Layer Thickness Material Function
1st layer front -outer 30 mm high strength concrete of grade not less than M-950 The complete sealing of the entire structure of the building from external moisture
2nd layer 35 mm concrete brand betoane less than M-250 Base layer for surface layer
3rd layer Not less than 215 mm the insulating material PCBS-M, having a weight of 13 kg/m3, specific thermal conductivity coefficient is 0.017 and DRAIN R0=10,58м2К/W The complete exclusion of loss of thermal energy from the premises through the exterior wall
4th internal layer (support layer for the device of floors) 120 mm concrete stamps concrete not less than M-350 Provides functions are not destructible buildings up to 8.5 Richter scale

All four layers of the block pierced by four fiberglass rods with a length of 350 mm, a diameter of not less than 6 mm.

The insulating material can be used any insulating materialthat has a mass less than 13 kg on 1 m3. Increasing this mass arises the necessity of increasing the thickness of the 3rd insulating layer.

 

Advantages:

technology completely eliminates the presence of energy in homes

no need to bring the energy supplying communications: Central heating, arrange and pay for supply gazopodvodyaschey pipelines, fracking stations providing reduced pressure of gas in pipelines gas supply, to purchase and install gas boilers, pipes and heating battery, to pay combusted natural gas,etc.,

– buildings do not require additional insulation and exterior cladding,

technology allows to build capital buildings in seismically active regions is not destructible to 8.5 Richter,

– throughout the rest of the buildings do not differ from normal permanent buildings and structures.

 

Exit mobile version