Remote control system for mobile vehicles, special equipment, etc.
Remote control system for mobile vehicles, special equipment, etc. designed to control the working operations of attachment of the mobile machine at a remote distance hand-held remote, and control of electric and electro-hydraulic nodes actuators of the machine for a given algorithm.
Remote control system for mobile vehicles, special equipment etc. is presented a remote control kit (KDU) “Conductor”.
Remote control kit (KDU) “Conductor” is intended for operator control the working operations of attachment of the mobile machine at a remote distance by using a portable console, as well as control of electric and electro-hydraulic nodes actuators of the machine for a given algorithm.
KDU Conductor installed on the following types of machines: crane-manipulator (CMU), drilling equipment, forestry machines, cranes, concrete pumps, mining machinery, special purpose machines and other equipment.
Features and benefits:
– KDU “Conductor” are designed and manufactured according to specifications, which included requirements for design, ergonomics, appearance, logic and configuration,
– control with a portable remote control radio or cable,
– management of all known types of hydraulic control valves with electrical control (solenoid c control, with integrated electronics),
– easy hardware adjustment characteristics of the control valve without a personal computer or laptop available even unskilled personnel in the field
– fine tuning of parameters control: the minimum and maximum speed of operation, rate of rise and fall of the control signal,etc.
– built-in self-test system allows in the shortest time to detect a fault in the systems of mobile machines, which leads to a reduction of time for repair,
remote especially designed for easy operation in extreme conditions (ambient temperature up to minus 40 degrees, precipitation is in the form of snow and rain, the fog, the dark, mechanical impacts),
– application in KDU digital radio allows to provide high stability and noise immunity close to cars within range of the hinged equipment,
– separate management consoles for multiple channel (up to 64) “next” – standing machines
– embedding of KDU in General the electronic control system of the mobile machine via CAN-bus.
– the lifts,
– mining engineering,
– forestry machines,
– dismantling robots
– drill machine,
– special vehicles
– concrete pumps,
– and so on.
remote mobile control station by which the operator controls the working operations of attachment of the mobile machine with a convenient location, being at a safe distance from working equipment. On the remote control installed electronic joysticks, switches, buttons, handles with potentiometer, switches, LEDs, displays, lamps, etc. the Organs of management and possibility of battery replacement was designed with the operator in warm gloves in winter conditions
– Central electronic unit (tseb) is designed to receive data from the console to further interact with the electric and electronic units of the mobile machine. The tseb with an antenna installed on the car
Note: the description of technology on the example of remote control kit (KDU) “Conductor”.