Hydrodynamic pump for heating of buildings and structures

Hydrodynamic pump for heating of buildings and structures.

 

 

Thermal hydrodynamic pump cavitation device for receiving heat generated by converting mechanical energy of rotation of the motor into thermal energy of the working fluid. Is a heat pump in its thermodynamic sense.

 

To buy the product

 

Description

The system of heating based on hydrodynamic pump

Advantages

Schematic diagram of the system of heating based on hydrodynamic pump

Video about hydrodynamic pump

 

Description:

Thermal hydrodynamic pump cavitation device for receiving heat generated by converting mechanical energy of rotation of the motor into thermal energy of the working fluid. Is a heat pump in its thermodynamic sense.

Thermal hydrodynamic pump is also referred to as a vortex heat pump.

Hydrodynamic pump generates heat by means of changes in physical-mechanical parameters of liquid medium during its flow under the complex influence of the accelerated and retarded motion (the so-called controlled cavitation).

 

The system of heating based on hydrodynamic pump:

The system of heating based on hydrodynamic pump consists of the following main parts:

the actual hydrodynamic pump, which is a cavitation devicethat is connected to the heating system

motor,

couplings

frame

automatic control system (controller).

A hydrodynamic pump and the motor are mounted on a single frame. Torque from the electric motor is transmitted to the pump via the hydrodynamic coupling.

 

Advantages:

– simplicity of design. A hydrodynamic pump can be quickly and easily installed in an existing heating system without changing its design,

high efficiency,

– high reliability,

does not require preparation of water. Available in water salt falls as an insoluble precipitate and are deposited in the filter

– the payback period from the date of installation of the hydrodynamic pump from 6 to 18 months

trouble-free operation for at least 10 years

– no emissions, no combustion products,

100% environmental friendliness,

– full fire – and explosion safety,

high efficiency compared to any other heating devices

– significantly reduces the cost of heating facilities and buildings, approximately in 2-3 times in comparison with traditional heating systems (for example, more efficient electric boilers in 1,5-2 times, more efficient diesel boilers in 5-10 times more economical than Central heating in 2 times),

does not require approvals for installation

unlike the heat pump, which could give the heat carrier with temperatures up to +65 °C, hydrodynamic pump may heat the coolant up to +95 °C.

 

Schematic diagram of the system of heating based on hydrodynamic pump:

 

Video about hydrodynamic pump:

 

Note: © Photo