Sciencealpha

Excentrico-cycloidal gears – new gear.

Excentrico-cycloidal gears – new gear.

 

 

Excentrico-gears cycloidal (EC-engagement) is a new type gear based on which it is possible to manufacture almost any gear (cylindrical, planetary and bevel gear) and pinion EC gears for mechanisms with rectilinear movement, EC pumps EC-compressors, EC-DVS.

 

Description

Advantages

Application

 

Description:

Excentrico-gears cycloidal (EC-engagement) is a new type gear based on which it is possible to manufacture almost any gear (cylindrical, planetary and bevel gear) and pinion EC gears for mechanisms with rectilinear movement, EC pumps EC-compressors, EC-DVS.

Implementation of EC-gearing in reductionstrategy brings engineering to a new stage of development, since the efficiency of a traditional – involute gearing 97%, and excentrico-cycloidal – more than 99%, the capacity per 1 kg weight respectively 16 kW/kg and 30kW/kg.

ETS gears have inclined teeth, the shape of which in cross section is formed by circular arcs and portions of a cycloidal curve.

Transmission mechanisms with EC-gearing especially effective in those branches of engineering that require either high-load characteristics, or small in weight and size, or high reliability transmission, such as automotive, shipbuilding, aerospace, machinery, valves, mining equipment, wind energy, lifting technique.

Based on EC-gearing constructed and can be manufactured:

EC reducers

ETS-pumps,

EC-compressors,

EC-turbine,

ETS-steam turbine

ETS-ice (engines combustion).

 

The advantages of EC-gearing in comparison with the most common involute gear*:

– reducing the weight and dimensions of several (up to 5) times with the same load or increase the load capacity in the same space,

increase the gear ratio U in one step to 30 (in involute gearing U <= 8),

– improved reliability and service life of wheels,

reduced requirements to mechanical properties of metals,

– ETS gears resistant to breaking the leg of a tooth,

the relative transmitted power is 2 times more evolvente,

permissible distortions and deviations of the center of the gap is 5-10 times higher in comparison with the involute gearing without loss of force characteristics,

theoretical efficiency of EC-gearing in the CTE of<0.1 is 99.9% due to the minimum slip point of engagement in the pole,

– ETS gears has a high kinematic accuracy, noise transfer,

low cost of manufacturing ETS-sisteren,

the cost is 2 times lower than evolvente,

not sensitive to mechanical impurities and gases

– ETS gears capable of operating at speeds up to 50,000 rpm

longer overhaul interval,

– low cost of operation,

no additional gear synchronization

– high specific weight indicators

high performance,

– the lack of oscillatory motion.

* When equal load characteristics in comparison with the most common involute gears.

 

Application:

processing and mining of minerals (open gearboxes, cooling towers, gear shaft, harvester, top drive drilling rig, a swivel, a booster compressor in the oil industry, submersible pump for oil production, reducer machine neftekachalki (new/repair), feed pump drilling mud,etc.)

power engineering (the gearbox of the wind turbine, the actuator locking apparatus of a steam turbine, mobile power station, EC-turbines, EC-DVS (engines combustion), etc.)

transportation engineering (main gear vehicles gear “the ship”, steering column, helicopter gearbox, the multiplier carriage, gearboxes, conveyors, gearboxes, mining excavators, gear Elevator,etc.)

General mechanical engineering (gearboxes, pumps and dispensers (NSH, screw), compressors, multiphase gear pump, gear in hand tools, food gearboxes without lubricant,etc.)

special industry (reducer antenna rotation, reducer deploy antennas, etc.).

 

Exit mobile version